This procedure describes how to create a static NIM route between two networks (for example, Network1 and Network3).
You can also use the Add New Network TaskGuide to establish the static network route:
To create a static NIM route between two networks, enter:
nim -o change -a routingseq_no='DestinationNetworkObject \ Gateway1 Gateway2' NetworkObject
where Gateway1 is the host name of the interface that clients on NetworkObject use to get to DestinationNetworkObject, and Gateway2 is the host name that clients on DestinationNetworkObject use to get back to NetworkObject.
For example, to establish a NIM route between Network1 and Network3, enter:
nim -o change -a routing1='Network3 gw1_tok gw1_fddi' Network1
where gw1_tok is the host name of the gateway that machines on Network1 use to communicate with machines on Network3, and gw1_fddi is the host name of the gateway that machines on Network3 use to communicate with machines on Network1.
The detailed information for the network objects now shows the added routing attributes.
To display the detailed information about the two networks, enter:
lsnim -l Network1 Network3
The command produces output similar to this:
Network1: class = networks type = tok net_addr = 9.101.1.0 snm = 255.255.255.0 Nstate = ready for use prev_state = ready for use routing1 = Network3 gw1_tok
Network3: class = networks type = fddi net_addr = 9.101.3.0 snm = 255.255.255.0 Nstate = ready for use prev_state = information is missing from this object's definition routing1 = Network1 gw1_fddi