[ Book Contents | Library Home | Legal | Search ]
Packaging Guide for LPP Installation

AIXlink/X.25 Package Information

This package provides the base X.25 function, including the protocol stack, device drivers, and adapter microcode. It also includes support for TCP/IP, NPI, DLPI, SNMP, and a PAD. The number of virtual circuits allowed per system is based on the license purchased. The following license options are available:

 

Basic Up to 16 virtual circuits allowed per system.
Extended Up to 64 virtual circuits allowed per system.
Advanced Up to 256 virtual circuits allowed per system.
Unrestricted Up to 4096 virtual circuits allowed per system.

Fileset Information

Fileset Name Description Requisite Software
sx25.rte

AIXlink/X.25 Run-Time Environment

This fileset provides the base X.25 device drivers, configuration methods, and applications necessary to use the other AIXlink/X.25 options.  
sx25.npi

AIXlink/X.25 NPI and DLPI Support

This fileset provides the device driver necessary to run NPI (Network Provider Interface) applications. sx25.rte

AIXlink/X.25 Run-Time Environment

sx25.comio

AIXlink/X.25 COMIO Compatibility Support and Applications

This fileset provides the device driver and applications for the COMIO compatibility interface. This interface provides compatibility with the AIX Version 3 base X.25 product. sx25.rte

AIXlink/X.25 Run-Time Environment

sx25.tcpip

AIXlink/X.25 TCP/IP Support

This fileset provides support for the TCP/IP protocol running over X.25. sx25.rte

AIXlink/X.25 Run-Time Environment

bos.net.tcp.client

TCP/IP Client Support

sx25.pad

AIXlink/X.25 Triple-X (PAD)

This fileset provides PAD software supporting the X.3, X.28 and X.29 standards. sx25.rte

AIXlink/X.25 Run-Time Environment

sx25.server

AIXlink/X.25 Server Support

This fileset is part of the standard AIXlink/X.25 package and provides an increased number of available virtual circuits based on the customer licensing agreement. sx25.rte

AIXlink/X.25 Run-Time Environment

Approximate Disk Space Required

The AIXlink/X.25 package requires approximately 4.2 megabytes of disk space if the entire package is installed.

Special Installation Notes

Stop all sx25 software before installing another version of the software. AIX version 4.1.5, 4.2.1, 4.3.1 or higher is required to install and run the AIXlink/X.25 product.

When applying updates (ie. using PTFs) to the AIXLink/X.25 product, the X.25 configuration may be lost. Therefore, use the backupx25 command to backup your configuration.
A migration (i.e., using install images) should retain your configuration, but to be on the safe side, do a backupx25 anyway.

Use of AIXlink/X.25 with the IBM ARTIC960 Microchannel adapter or the IBM ARTIC960Hx 4-Port Selectable PCI adapter requires the installation of device support for the adapter, which is packaged on a diskette that is shipped with the adapter. The IBM ARTIC960 AIX Support Program (devices.artic960.rte) must be at level 1.3.1.0 or higher. The devices.artic960 image is also included on the AIXlink/X.25 LPP Version 1.1.5.0 CD for your convenience.


[ Book Contents | Library Home | Legal | Search ]