ATE Error Identifiers for the Error Log

This category of identifiers contains the following error labels:

ATE ERR1   ATE ERR2   ATE ERR3

ATE ERR4   ATE ERR5   ATE ERR6

ATE ERR7   ATE ERR8   ATE ERR9

ATE ERR10

Go back to the categories of Error Identifiers.

ATE ERR1

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE (asynchronous terminal emulation) if no pacing character is received.

ATE ERR2

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if excessive transmission errors occur.

ATE ERR3

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if no acknowledgement is received from the receiving site.

ATE ERR4

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if the receiving site is not ready.

ATE ERR5

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if the sending site is not sending.

ATE ERR6

Error Description: SOFTWARE PROGRAM ERROR

This error is logged by ATE for no carrier signal.

ATE ERR7

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if checksum error is detected.

ATE ERR8

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if sector is received twice.

ATE ERR9

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if incorrect sector is received.

ATE ERR10

Error Description: COMMUNICATION PROTOCOL ERROR

This error is logged by ATE if sector could not be verified.