This category of identifiers contains the following error labels:
DISK ERR1 DISK ERR2 DISK ERR3
DISK ERR4 DISK ERR5 IDE DISK ERR1
IDE DISK ERR2 IDE DISK ERR3 IDE DISK ERR4
Go back to the categories of Error Identifiers.
Error Description: CD-ROM, DISK, or R/W OPTICAL DRIVE OPERATION ERROR
This error is recorded by the SCSI disk device driver in the event of a media error.
| Sense Data | The sense data consists of failure data which is analyzed by the Diagnostic Programs. |
Error Description: CD-ROM, DISK, or R/W OPTICAL DRIVE FAILURE
This error is recorded by the SCSI disk device driver in the event of a physical hardware error.
| Sense Data | The sense data consists of failure data which is analyzed by the Diagnostic Programs. |
Error Description: CD-ROM, DISK, or R/W OPTICAL DRIVE FAILURE
This error is recorded by the SCSI disk device driver in the event of an adapter detected failure.
| Sense Data | Sense data is not applicable for this error. Zeros are recorded. |
Error Description: CD-ROM, DISK, or R/W OPTICAL RECOVERED ERROR
This error is recorded by the SCSI disk device driver in the event of a recovered error. Either the device or the device driver recovered the data.
| Sense Data | The sense data consists of failure data which is analyzed by the Diagnostic Programs. |
Error Description: UNDETERMINED ERROR
This error is recorded by the SCSI disk device driver in the event of an unknown failure.
| Sense Data | Sense data is not applicable for this error. Zeros are recorded. |
Error Description: DISK OPERATION ERROR
This error is recorded by the IDE disk device driver when a media error has been detected.
| Status Validity and ATA Command Data | |
| The status validity and ATA command data contain information about the failed command which may be analyzed by diagnostic programs. | |
Error Description: SOFTWARE ERROR
This error is recorded by the IDE disk device driver when a disk has aborted a command. This can occur when a disk rejects an unsupported command. It can also indicate a failure in the disk drive or IDE controller electronics.
| Status Validity and ATA Command Data | |
| The status validity and ATA command data contain information about the failed command which may be analyzed by diagnostic programs. | |
Error Description: DISK FAILURE
This error is recorded by the IDE disk device driver in response to a failure that is neither a media error nor an aborted command. It can occur when a disk drive has suffered a hardware failure.
| Status Validity and ATA Command Data | |
| The status validity and ATA command data contain information about the failed command which may be analyzed by diagnostic programs. | |
Error Description: DISK FAILURE RECOVERED DURING RETRY
This error is recorded by the IDE disk device driver in the event of a recovered error. Either the disk or the device driver recovered the error.
| Status Validity and ATA Command Data | |
| The status validity and ATA command data contain information about the failed command which may be analyzed by diagnostic programs. | |