This category of identifiers contains the following error labels:
COM CFG ADPT COM CFG BUSI COM CFG BUSID
COM CFG BUST COM CFG DEVA COM CFG DEVD
COM CFG DMA COM CFG IFLG COM CFG ILVL
COM CFG INTR COM CFG MNR COM CFG NADP
COM CFG PIN COM CFG PORT COM CFG RESID
COM CFG SLIH COM CFG UIO COM CFG UNK
COM CFG UNPIN COM MEM SLIH COM PERM PIO
COM PERM SLIH COM PIN SLIH COM TEMP PIO
COM CFG PORT COM CFG RESID COM CFG SLIH
COM CFG UIO COM CFG UNK COM MEM SLIH
COM PERM PIO COM TEMP PIO
Go back to the categories of Error Identifiers.
Error Description: CONFIGURATION FAILED: ADAPTER CONFIGURED
This error is logged by the TTY device driver during configuration if the adapter has already been configured.
| ERROR CODE | System error code (see sys/errno.h). |
Error Description: CONFIGURATION FAILED: BAD BUS ID
This error is logged by the TTY device driver if a bad bus ID is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BUS ID OUT OF RANGE
This error is logged by the TTY device driver if a bad bus ID that is out of range is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BAD BUS TYPE
This error is logged by the TTY device driver if a bad bus type is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: STR_INSTALL (LOAD ) FAILED
This error is logged by the TTY device driver if call to str_install () fails during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: STR_INSTALL (UNLOAD ) FAILED
This error is logged by the TTY device driver if call to str_install () fails during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: DMA LEVEL CONFLICT
This error is logged by the TTY device driver if a DMA level conflict is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BAD INTERRUPT FLAG
This error is logged by the TTY device driver if a bad interrupt flag is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BAD INTERRUPT LEVEL
This error is logged by the TTY device driver if a bad interrupt level is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: INTERRUPT PRIORITY
This error is logged by the TTY device driver if bad interrupt priority is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BAD MINOR NUMBER
This error is logged by the TTY device driver if a bad minor device number is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: ADAPTER NOT PRESENT
This error is logged by the TTY device driver during configuration if adapter-not-present is detected.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: PORT CONFIGURED
This error is logged by the TTY device driver during configuration if the port has already been configured.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: RESID NOT CORRECT
This error is logged by the TTY device driver if bad residual count is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: I_INIT OF SLIH FAILED
This error is logged by the TTY device driver if call to i_init() fails during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: RESID NOT CORRECT
This error is logged by the TTY device driver during configuration if uiomove() fails with incorrect residual.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CONFIGURATION FAILED: BAD ADAPTER TYPE
This error is logged by the TTY device driver if bad adapter type is detected during configuration.
Refer to the Detail Data under COM CFG ADPT.
Error Description: CAN NOT ALLOCATE MEMORY: SLIH STRUCTURE
This error is logged by the TTY device driver if malloc() for SLIH structure fails.
Refer to the Detail Data under COM CFG ADPT.
Error Description: PIO EXCEPTION
This error is logged by the TTY device driver if a programming input or output exception has occurred, indicating possible adapter failure.
| PIO csr register | PIO channel status register. |
| PIO dsisr register | PIO data storage interrupt status register. |
| PIO srval register | PIO segment register contents. |
| PIO dar register | PIO data address register. |
| Adapter Check Status | |
| Adapter check status. | |
Error Description: PIO EXCEPTION
This error is logged by the TTY device driver if a temporary PIO error is detected.
| PIO csr register | |
| PIO channel status register. | |
| PIO dsisr register | PIO data storage interrupt status register. |
| PIO srval register | PIO segment register contents. |
| PIO dar register | PIO data address register. |
| Adapter Check Status | |
| Adapter check status. | |
| Additional information | |
| Additional failure data which should be made available to the service organization if this problem requires a service call. | |